求机械类专业英语翻译

作者&投稿:郭泰 (若有异议请与网页底部的电邮联系)
跪求机械专业术语英语在线翻译网站!~

你去下载一个NCCE英汉科技词典吧,里面的科技词汇还是比较丰富的,包括汽车,工程机械方面的。但是是单机的词典,只有里面它固有的词汇。

iciba还是算了,基本没有用。

纯手译, 个别地方可能翻译欠佳,供楼主参考。

Mechanical damage to soybean seed during processing
Abstract
黄豆种子在加工过程中的机械损坏。
摘要

The effect of seed cleaning and handling on soybean seed germination and physical integrity were
determined with changing seed moisture content (m:c:).
黄豆种子清洁的效果以及质量方面的处理,是由种子含水量改变而决定的。

In addition, storage behavior of seed and loss of
storability caused by damage resulting from free-fall from different heights were determined.
另外, 种子存储方式以及可存储性由从不同高度下落造成的损坏所决定。

Six lots of the variety‘‘MA CS-13’’ at three different m:c:’s were passed through a vertical bucket elevator, cleaner with grader, and gravity separator and evaluated for mechanical damage, germination, and vigor index. The storage behavior of the lots, at different stages of processing, was studied by performing an accelerated aging test.
六批有三个不同含水量的 MA CS-13, 经过垂直的链斗升降机, 带有分级机的清洁机,重力分离机, 然后按照机械损伤、发芽状况以及种子活力评估。这批的存储方式在不同阶段的处理上有意的执行了一个加速老化试验。

The effect of free-fall on quality of the seed was studied by dropping six seed lots from four different heights on to cement and galvanized iron floors.
种子自由下落质量检测的效果是这样去衡量的,六个种子一组,从四个不同高度降落到水泥地和电镀铁地板上。

The vertical bucket elevator significantly decreased germination and increased splits and seed coat
damage.
垂直链斗升降机显著地减慢了发芽, 增加了种皮的裂开及损坏。

The seed lots at 12% m:c: (dry basis ), suffered less loss in seed quality than the lots at 10% or 11% m:c: The storage quality of seed, as predicted by the accelerated aging test, at 12% m.c. was also better than the lots at 10% or 11% m:c: A free-fall of soybean seed from different heights on to the cement floor resulted in greater loss in qualitythan when dropped on to the galvanized iron floor.

含水量在12%的那批(折干计算)种子,质量损失比含水量在10%和11%的种子少。 种子存储质量, 按照加速老化试验所预测的, 含水量为12%的种子比10%及11%都都要更好一些。黄豆种子从不同高度自由下落到水泥地上所造成的质量损失要比电镀铁板上的大。

2002 Elsevier Science Ltd. All rights reserved.
2002 Elsevier科技有限公司保持所有权利。

Keywords: Soybean; Processing; Mechanical damage; Germination; Moisture content
关键词: 黄豆, 处理, 机械损伤, 发芽, 含水量。

1. Introduction
Soybean (Glycine max (L.) Merr.) is a protein- and oil-rich legume. It contains 40% protein and
20% oil along with calcium, iron, carotene, thiamine, and ascorbic acid. According to the ancient
written record of China, it was cultivated as early as 2000 BC (Probst and Judd, 1973). Its spread

1. 介绍
黄豆是一种富含蛋白质和油的豆类。它含有40%的蛋白质, 20%的油, 以及钙, 铁, 胡萝卜素,维生素b1, 抗坏血酸维生素C。 依照中国古代记录, 公元前2000年人们就开始种植它了。

Corresponding author. 联系作者:
Tel.: +1-204-474-6033; fax: +1-204-474-7512.
电话 传真
E-mail address: digvir jayas@umanitoba.ca (D.S.Jayas).邮箱
0022-474X/02/$ - see front matter r 2002 Elsevier Science Ltd. All rights reserved.
PII: S 0 0 2 2 - 4 7 4 X ( 0 1 ) 0 0 0 4 0 - 6

AT&T has installed the Global Information Systems Architecture(GISA), which standardizes its business manufacturing systems worldwide. The objective is for AT&T to improve its ability to compete in all profitable telecommunication marked wherever they may be located. With in place, concurrent product development is possible, using whatever corporate resources required regardless of their physical location.
美国电话电报公司(AT&T)建立了一个全球化的信息系统体系(GISA)来将其全球化的业务制造系统进行标准化。其目标就是为了改善AT&T在各个通信市场的竞争力而不考虑这些市场的地理位置。当GISA投入应用之后,使用合作资源而不考虑这些资源地理位置的并行产品开发就成为了可能
7. Simultaneous Inter-company Competition and Cooperation
并存的公司间的竞争和合作
To a degree unprecedented in American business history, companies are entering into partnerships, joint ventures, and collaborations of every imaginable kind, including the information of virtual companies. Some of these relationships aim at creating economies of scale by merging similar capabilities in order to avoid the costs of adding capacity. Some aim at joint development of new “back-office” capabilities, and some cooperating companies work on the development of new generic technologies, even as they plan to compete with one another for the end user. Some companies aim at achieving vertical integration, or at creating economies of scope, by synthesizing physically distributed complementary capabilities within or among enterprises. This is, of course, the essence of a virtual organization structure
在美国历史的很长一段时间里,曾经出现过公司间合作狂热——它们以
包括虚拟的信息公司在内的各种你所能想象得到的形式进行合伙,合资以及协作。这之中有些公司是通过合并相似产能来避免产能增加时的成本负担,通过这样创造了规模经济。而一些公司通过合作致力于发展出一种新的“后勤”能力(大概是指信息技术、会计、人力资源等部门的合作吧)。有些合作的公司致力于发展新一代的技术——尽管他们可能会竞争这种产品的终端用户。还有一些公司通过与其他拥有互补能力企业的综合的方式,来实现垂直的统一管理,或者是扩大经营范围。当然这已经是虚拟企业的本质了。
What is particular striking in all these forms of joint venture is the increasing frequency of participation of direct competitors. It would be wrong to conclude t that we are witnessing a return of late-nineteenth-century trusts, cartels, and price-manipulating monopolies. Rather, there is a growing recognition that the basis of inter-enterprise cooperation is totally different with agile competition from what it was with mass-production competition
In the mass—production paradigm, competition was one—dimensional and centered on price; hence the pursuit of the lowest unit production cost. The competitive environment was dominated by long-lived, standardized products. Cooperation among competitors inevitably took the form of price and supply-fixing as a means of increasing profits above the levels that lowest unit costs and an excess of supply would allow.
In the agile production paradigm, competition is multidimensional. Price remains important, of course, but the value of physical products is a function of individualized combinations of information and services the products provide.
所有这些合作形式里面尤其令人吃惊的是直接竞争对手参与其中的频率越来越高。而这种现象恐怕不能归结于企业之间回到了十九世纪末的信任,形成垄断集团或者是进行价格操纵的垄断。我们更愿意相信这是因为:越来越多的人认识到敏捷制造时代竞争下的企业间协作和大量生产时代竞争下的协作已经完全不一样了。在一个大量生产的例子里,竞争是集中于价格单因素的。竞争环境受到长使用寿命,标准化产品的限制。对于以价格作为竞争形式公司来说,合作就是与供应商之间——采取固定供应商降低单位成本来使利润高于平均水平。
而在一个敏捷制造的例子里,竞争是多样化的。价格当然还是重要的,但是实物产品的价值还得根据产品所提供的信息和服务进行综合考虑

。aimbot(高于其他任何aimbot保证!) 激活不同的键(以致较难unnoticibleifyouretryingtomake 这样说)-自动瞄准autoshoot透墙瞄准整合与墙hacks目标,选择视野(使得 少unnoticibleifyouretryingtomakeitthatway)-各种autoshoot模式(以致较难unnoticibleifyouretrying 以这种方式)=瞄准载体规格载体myawesome特定武器headshot载体--我的终极ownage 20000,非headshot-我的上司签字headshot! ! ! 最后,我决定把这些甜蜜20000公=)-目标锁定--预测运动无核武器bobbing随机瞄准 -顺利瞄准(模拟出人类的目的,使得它少unnoticibleifyouretryingtomakeitthatway) 视觉选项-3rdpersonview-多crosshair选择-续白色=crosshair-opengl/wallhacks-xqz2风格-华硕风格线框蓝 -红-绿-白-黑粉色黄色白墙-夜间模式-兰伯特(全中)实体透明度admin字体控制台字体 -admin字体背景-蓝色hud雷达(显示敌人太!!!!)额外的感官知觉(又名esp)-球员esp-reload指标选手莫 del盒(使一箱左右的球员...牛!!!) -列名球员枪炮球员距离球员卫生选手娜 mes先来50分,有大量追加在

悬赏分太低

龙门车床中心
模型
龙门式加工中心
型号
VMT4
1.技术数据
1.1机械基础(布局P142-3)
两圆柱之间最大径向间隙
3500mm
最大机械加工-/毛坯高度(在主轴头部
GB-水头)
2300mm
台宽度
2500mm台长度4000mm
最大负载25000千克
Y轴连杆刀座鞍水平移动(总数)
5400mm
连杆刀座鞍从中心水平运动到左
3400mm
连杆刀座鞍从中心水平运动到右
2000mm
连杆的垂直移动(Z轴)
1600mm
横轨传送带宽度的垂直移动
1400mm
对Z轴的功率限制是封闭的
连杆尺寸
420*520mm
XYZ轴的最大供给推动力
50000牛
钻孔和切削连接(主要头原理)
S1驱动功率
(100%功率周期)
72千瓦
主轴转速值域
每分钟0~3000转
驱动齿轮值域数
3
最大主轴
每分钟3000转
最大主轴扭矩
6000纳米
旋转工作台转动
+-190度
旋转工作台扭矩
6000纳米
旋转工作台扭矩(夹紧)
20000纳米
旋转工作台精确度配置
+-3秒
(旋转工作台位置和补偿的选择)
+-2秒
供给/快速横切
Y/Z轴
每分钟0到16000毫米
供给/传送带宽度的快速横切
每分钟0到2000毫米
工作台移动行程总数(X轴)
5000mm


机械专业英语翻译
One A system that transmits forces in a predetermined manner to accomplish specific objectives may be considered a machine. A mechanism may be defined in a similar manner, but the term mechanism is usually applied to a system where the principal function is to transmit motion. ...

机械专业英语翻译成中文(急)
One, the upper-bound solution, provides a value which is known to be higher than or eq slip line techniques ual to the actual force; 一个是上限解,它提供了一个已知高于或等于实际力的值(这里原文有错,翻译不一定确切,请稍加修改);the other, the lower-bound solution,provides a...

机械工程专业英语翻译,急求
RIA 和国际标准组织定义两者都强调多功能和可设计的能力而且,因此,排除特别的-典型地企图 " 难的自动化 " 工具和设备发现在高体积生产中。也排除是人工的遥远操作者, 为使用是人类手的延长在,举例来说,不毛、热,或放射性的环境。在 Japan.the japanese 工业的机械手协会 (JIRA) 分类输入的数据的...

机械师用英语怎么说
制造、交通等领域都有广泛的应用,是现代社会不可或缺的一部分。在英语中,机械师还可以用其他词汇来表达,例如Mechanical Engineer(机械工程师)、Mechanical Technician(机械技术员)等。总之,机械师的英文翻译是Mechanic,它是一个广泛应用于工业和制造领域的专业术语。希望我的回答对你有帮助!

机械英语
holder,on 皮带头部固定,开 23.SBH to feeding pos. SBH到送带(进料)位置 24.strap guide open position 皮带指导打开位置 25.carriage to home position 传送到原位 因为比较专业,也没有说明是该机械是做什么工作的。只能猜测,大概是这样的意思。楼主可以参考一下,结合自己的理解再修改。

机械专业英语翻译
1.2.9有限的平衡 对于一个拥有N种反应物,L种元素的K反应系统来说,如果 N=K+L 1.2.45 等式成立,显而易见,根据等式1.2.43以及1.2.44经过合并简化,就可以通过K+L确定N种物质,且具有唯一性。如果N大于K+L,系统反应不完全,且具有不稳定性。然而,通常情况是更多的反应类型是N小于...

求机械类专业英语翻译
AT&T has installed the Global Information Systems Architecture(GISA), which standardizes its business manufacturing systems worldwide. The objective is for AT&T to improve its ability to compete in all profitable telecommunication marked wherever they may be located. With in place, ...

“机械设计制造及其自动化”用英语怎么说?
Machinery Design and Manufacturing and Its Automation咋一看跟一楼还有三楼的差不多,其实不一样。这是我们学校对我们这个专业的翻译

用英语怎么说:“我的专业是机械设计制造及其自动化”
如果是去外企面试或者申请留学,可以说: I was graduated from XX university,my major is Mechanic Engineering.如果就在国内,就说:I was graduated from XX university,my major is Machanic Engineering and Automatical.mechanic 英 [məˈkænɪk] 美 [mɪˈ...

机械专业英语
磨筒mill container 齿轮传动 gear drive 模数modulus 行星轮系(planetary gear trains 立式球磨机Vertical Ball Mill torque转矩 一致性consistency teeth number 齿数 两倍关系two-fold revolution and rotation 公转、自转 electromotor电动机 带传动 belt drive 底座pedestal bolts螺钉 To obtain the running ...

铜梁县19744093623: 机械专业英语(汪永明主编书籍) - 搜狗百科
金航斯利:[答案] 为在冲压中集成了两个C形组合冲压成型工具机内支持和引导下,他们在这样一个可以被淘汰和移动分开的方式使用条款的双方孔打孔机.手段是提供放置组件,一方面在工作位置,其中一拳打工具在一个位置的工具支持的是在预定的距离保持飞机...

铜梁县19744093623: 机械工程专业英语翻译.求好心的大神帮助.急急急~ -
金航斯利: Stirred tank reactor is by the two parts of the mixer body and a kettle body, mainly in the head and cylinder body composed of, for the medium and low pr...

铜梁县19744093623: 机械类专业的翻译(中译英) -
金航斯利: The special field that I study is machinofacture and their automation , this special field being that engineering course one resembles , talented person applying technicality as long as this special field being to train machinery a kind give first place to. ...

铜梁县19744093623: 求机械专业术语英语翻译 -
金航斯利: 翻译如下:1. European technology: the new generation of the first-class gate bridge machine tool2. Gate bridge machining centre3. Vertical machining centre4. Engraving and milling machine5. Drill-threading machine

铜梁县19744093623: 求助机械专业英语翻译 -
金航斯利: 1.Compliant Mechanism Synthesis for Shape-Change Applications 2.As opposed to the two-step synthesis that separates the interrelated topology and dimensional aspects of a compliant mechanism, we propose an optimization model using a ...

铜梁县19744093623: 机械类的专业英语,在线等译文...
金航斯利: 管法兰用于机械连接管段,以其他管段,内置组件,还允许管组装和拆卸没有切割或焊接,无需为这两项行动是在拆除提供易碎的联合,但是,不幸的是提供一个法兰泄漏路径的进程中所载的流体到这一点,使用法兰需要最大限度地减少可能的...

铜梁县19744093623: 机械专业英语翻译 求高人!!!! -
金航斯利: Permanent magnet bearings is the magnetic bearing is the use of magnetic field strength will be suspended shaft with a new type of bearing, and long life operation with no lubrication, no oil pollution, etc.. With the machinery manufacturing industry ...

铜梁县19744093623: 请帮忙翻译一下机械方面的专业英语,谢谢!
金航斯利: The driving wheel is mounted with an expansion plate and a compression plate. The expansion plate has centrifugal balls inside. Along the outline of the driven wheel there's a friction wheel which has centrifugal friction modules inside. The driven wheel is connected with the gear box with gears.

铜梁县19744093623: 求下面机械制造专业英语的翻译,...
金航斯利: 第1课该分公司的科学分析,处理的议案,时间和力量,是所谓的mechanicenbsp;,并成立拖车部分,静力学和动力学.nbsp;例如,如果该部队的运作袖白令becoes太hignnbsp;,它将排挤油膜和事业的金属-金属接触,过热和快速失败的...

本站内容来自于网友发表,不代表本站立场,仅表示其个人看法,不对其真实性、正确性、有效性作任何的担保
相关事宜请发邮件给我们
© 星空见康网