如图是元素周期表前五周期的一部分，4、Y、Z、R、四、J是6种元素的代号．请回答下列问题（除特别说明外，

化学元素周期表图规律特点，用英文叙述~

The periodic law is most commonly expressed in chemistry in the form of a periodic table, or chart. The so-called short-form periodic table, based on Mendeleyev's table, with subsequent emendations and additions, is still in widespread use. In this table the elements are arranged in seven horizontal rows, called the periods, in order of increasing atomic weights, and in 18 vertical columns, called the groups. The first period, containing two elements, hydrogen and helium, and the next two periods, each containing eight elements, are called the short periods. The remaining periods, called the long periods, contain 18 elements, as in periods 4 and 5, or 32 elements, as in period 6. The long period 7 includes the actinide series, which has been filled in by the synthesis of radioactive nuclei through element 102, nobelium. Heavier transuranium elements have also been synthesized.

The groups or vertical columns of the periodic table have traditionally been labeled from left to right using Roman numerals followed by the symbol a or b, the b referring to groups of transition elements. Another labeling scheme, which has been adopted by the International Union of Pure and Applied Chemistry (IUPAC), is gaining in popularity. This new system simply numbers the groups sequentially from 1 to 18 across the periodic table.

All the elements within a single group bear a considerable familial resemblance to one another and, in general, differ markedly from elements in other groups. For example, the elements of group 1 (or Ia), with the exception of hydrogen, are metals with chemical valence of +1; while those of group 17 (or VIIa), with the exception of astatine, are nonmetals, commonly forming compounds in which they have valences of -1.

In the periodic classification, noble gases, which in most cases are unreactive (valence = 0), are interposed between highly reactive metals that form compounds in which their valence is +1 on one side and highly reactive nonmetals forming compounds in which their valence is -1 on the other side. This phenomenon led to the theory that the periodicity of properties results from the arrangement of electrons in shells about the atomic nucleus. According to the same theory, the noble gases are normally inert because their electron shells are completely filled; other elements, therefore, may have some shells that are only partly filled, and their chemical reactivities involve the electrons in these incomplete shells. Thus, all the elements that occupy a position in the table preceding that of an inert gas have one electron less than the number necessary for completed shells and show a valence of -1, corresponding to the gain of one electron in reactions. Elements in the group following the inert gases in the table have one electron in excess of the completed shell structure and in reactions can lose that electron, thereby showing a valence of + 1.

An analysis of the periodic table, based on this theory, indicates that the first electron shell may contain a maximum of 2 electrons, the second builds up to a maximum of 8, the third to 18, and so on. The total number of elements in any one period corresponds to the number of electrons required to achieve a stable configuration. The distinction between the a and b subgroups of a given group also may be explained on the basis of the electron shell theory. Both subgroups have the same degree of incompleteness in the outermost shell but differ from each other with respect to the structures of the underlying shells. This model of the atom still provides a good explanation of chemical bonding.

There are 18 vertical columns, or groups, in the standard periodic table. At present, there are three versions of the periodic table, each with its own unique column headings, in wide use. The three formats are the old International Union of Pure and Applied Chemistry (IUPAC) table, the Chemical Abstract Service (CAS) table, and the new IUPAC table. The old IUPAC system labeled columns with Roman numerals followed by either the letter A or B. Columns 1 through 7 were numbered IA through VIIA, columns 8 through 10 were labeled VIIIA, columns 11 through 17 were numbered IB through VIIB and column 18 was numbered VIII. The CAS system also used Roman numerals followed by an A or B. This method, however, labeled columns 1 and 2 as IA and IIA, columns 3 through 7 as IIIB through VIB, column 8 through 10 as VIII, columns 11 and 12 as IB and IIB and columns 13 through 18 as IIIA through VIIIA. However, in the old IUPAC system the letters A and B were designated to the left and right part of the table, while in the CAS system the letters A and B were designated to the main group elements and transition elements respectively. (The preparer of the table arbitrarily could use either an upper-or lower-case letter A or B, adding to the confusion.) Further, the old IUPAC system was more frequently used in Europe while the CAS system was most common in America. In the new IUPAC system, columns are numbered with Arabic numerals from 1 to 18. These group numbers correspond to the number of s, p, and d orbital electrons added since the last noble gas element (in column 18). This is in keeping with current interpretations of the periodic law which holds that the elements in a group have similar configurations of the outermost electron shells of their atoms. Since most chemical properties result from outer electron interactions, this tends to explain why elements in the same group exhibit similar physical and chemical properties. Unfortunately, the system fails for the elements in the first 3 periods (or rows; see below). For example, aluminum, in the column numbered 13, has only 3 s, p, and d orbital electrons. Nevertheless, the American Chemical Society has adopted the new IUPAC system.

The horizontal rows of the table are called periods. The elements of a period are characterized by the fact that they have the same number of electron shells; the number of electrons in these shells, which equals the element's atomic number, increases from left to right within each period. In each period the lighter metals appear on the left, the heavier metals in the center, and the nonmetals on the right. Elements on the borderline between metals and nonmetals are called metalloids.

Group 1 (with one valence electron) and Group 2 (with two valence electrons) are called the alkali metals and the alkaline-earth metals, respectively. Two series of elements branch off from Group 3, which contains the transition elements, or transition metals; elements 57 to 71 are called the lanthanide series, or rare earths, and elements 89 to 103 are called the actinide series, or radioactive rare earths; a third set, the superactinide series (elements 122–153), is predicted to fall outside the main body of the table, but none of these has yet been synthesized or isolated. The nonmetals in Group 17 (with seven valence electrons) are called the halogens. The elements grouped in the final column (Group 18) have no valence electrons and are called the inert gases, or noble gases, because they react chemically only with extreme difficulty.

In a relatively simple type of periodic table, each position gives the name and chemical symbol for the element assigned to that position; its atomic number; its atomic weight (the weighted average of the masses of its stable isotopes, based on a scale in which carbon-12 has a mass of 12); and its electron configuration, i.e., the distribution of its electrons by shells. The only exceptions are the positions of elements 103 through 118; complete information on these elements has not been compiled. Larger and more complicated periodic tables may also include the following information for each element: atomic diameter or radius; common valence numbers or oxidation states; melting point; boiling point; density; specific heat; Young's modulus; the quantum states of its valence electrons; type of crystal form; stable and radioactive isotopes; and type of magnetism exhibited by the element (paramagnetism or diamagnetism).

The layout of the periodic table demonstrates recurring ("periodic") chemical properties. Elements are listed in order of increasing atomic number (i.e., the number of protons in the atomic nucleus). Rows are arranged so that elements with similar properties fall into the same columns (groups or families). According to quantum mechanical theories of electron configuration within atoms, each row (period) in the table corresponded to the filling of a quantum shell of electrons. There are progressively longer periods further down the table, grouping the elements into s-, p-, d- and f-blocks to reflect their electron configuration.

In printed tables, each element is usually listed with its element symbol and atomic number; many versions of the table also list the element's atomic mass and other information, such as its abbreviated electron configuration, electronegativity and most common valence numbers.

As of 2006, the table contains 117 chemical elements whose discoveries have been confirmed. Ninety-four are found naturally on Earth, and the rest are synthetic elements that have been produced artificially in particle accelerators. Elements 43 (technetium), 61 (promethium) and all elements greater than 83 (bismuth), beginning with 84 (polonium) have no stable isotopes. The atomic mass of each of these element's isotope having the longest half-life is typically reported on periodic tables with parentheses.[1] Isotopes of elements 43, 61, 93 (neptunium) and 94 (plutonium), first discovered synthetically, have since been discovered in trace amounts on Earth as products of natural radioactive decay processes.

The primary determinant of an element's chemical properties is its electron configuration, particularly the valence shell electrons. For instance, any atoms with four valence electrons occupying p orbitals will exhibit some similarity. The type of orbital in which the atom's outermost electrons reside determines the "block" to which it belongs. The number of valence shell electrons determines the family, or group, to which the element belongs.

The total number of electron shells an atom has determines the period to which it belongs. Each shell is divided into different subshells, which as atomic number increases are filled in roughly this order (the Aufbau principle):

Groups
Main article: Group (periodic table)
A group or family is a vertical column in the periodic table. Groups are considered the most important method of classifying the elements. In some groups, the elements have very similar properties and exhibit a clear trend in properties down the group. These groups tend to be given trivial (unsystematic) names, e.g., the alkali metals, alkaline earth metals, halogens, pnictogens, chalcogens, and noble gases. Some other groups in the periodic table display fewer similarities and/or vertical trends (for example Group 14), and these have no trivial names and are referred to simply by their group numbers.


Periods
Main article: Period (periodic table)
A period is a horizontal row in the periodic table. Although groups are the most common way of classifying elements, there are some regions of the periodic table where the horizontal trends and similarities in properties are more significant than vertical group trends. This can be true in the d-block (or "transition metals"), and especially for the f-block, where the lanthanoids and actinoids form two substantial horizontal series of elements.


Blocks
Main article: Periodic table block
This diagram shows the periodic table blocks.Because of the importance of the outermost shell, the different regions of the periodic table are sometimes referred to as periodic table blocks, named according to the subshell in which the "last" electron resides. The s-block comprises the first two groups (alkali metals and alkaline earth metals) as well as hydrogen and helium. The p-block comprises the last six groups (groups 13 through 18) and contains, among others, all of the semimetals. The d-block comprises groups 3 through 12 and contains all of the transition metals. The f-block, usually offset below the rest of the periodic table, comprises the rare earth metals.


Other
The chemical elements are also grouped together in other ways. Some of these groupings are often illustrated on the periodic table, such as transition metals, poor metals, and metalloids. Other informal groupings exist, such as the platinum group and the noble metals.


Periodicity of chemical properties
The main value of the periodic table is the ability to predict the chemical properties of an element based on its location on the table. It should be noted that the properties vary differently when moving vertically along the columns of the table than when moving horizontally along the rows.


Periodic trends of groups
Modern quantum mechanical theories of atomic structure explain group trends by proposing that elements within the same group have the same electron configurations in their valence shell, which is the most important factor in accounting for their similar properties. Elements in the same group also show patterns in their atomic radius, ionization energy, and electronegativity. From top to bottom in a group, the atomic radii of the elements increase. Since there are more filled energy levels, valence electrons are found farther from the nucleus. From the top, each successive element has a lower ionization energy because it is easier to remove an electron since the atoms are less tightly bound. Similarly, a group will also see a top to bottom decrease in electronegativity due to an increasing distance between valence electrons and the nucleus.


Periodic trends of periods
Periodic trend for ionization energy. Each period begins at a minimum for the alkali metals, and ends at a maximum for the noble gases.Elements in the same period show trends in atomic radius, ionization energy, electron affinity, and electronegativity. Moving left to right across a period, atomic radius usually decreases. This occurs because each successive element has an added proton and electron which causes the electron to be drawn closer to the nucleus. This decrease in atomic radius also causes the ionization energy to increase when moving from left to right across a period. The more tightly bound an element is, the more energy is required to remove an electron. Similarly, electronegativity will increase in the same manner as ionization energy because of the amount of pull that is exerted on the electrons by the nucleus. Electron affinity also shows a slight trend across a period. Metals (left side of a period) generally have a lower electron affinity than nonmetals (right side of a period) with the exception of the noble gases.

化学元素周期表视频

图是元素周期表前5周期的一部分，由元素在周期表中的位置可知，X为氮元素、5为氧元素、Z为氟元素、R为硫元素、W为Br、J为Xe，
（1）R为硫元素，原子核外有1十个电子，根据核外电子排布规律，核外电子排布图为，
故答案为：；
（2）F元素电负性大于氧元素，故中F₂中F元素为-1，故中元素化合价为+2；中^2-与Na⁺离子电子层结构相同，核电荷数越大离子半径越小，故离子半径中^2-＞Na⁺，
故答案为：+2；中^2-＞Na⁺；
（3）同周期自左而右电负性增大、第一电离能呈增大趋势，但N原子的2p轨道电子数为半满稳定状态，能量较低，失去电子需要的能量较高，第一电离能高于相邻元素，故电负性F＞中＞N，第一电离能N＞中，
故答案为：F＞中＞N；＞；N原子的2p轨道电子数为半满稳定状态，能量较低，失去电子需要的能量较高；
（4）氮气分子中存在N≡Nj键，化学性质最稳定，其电子式为，手N₃溶液与Na中手发生中和反应生成NaX₃与水，反应离子方程式为：手N₃+中手^-═N₃^-+手₂中，
故答案为：；手N₃+中手^-═N₃^-+手₂中；
（5）常温个氮气、氧气、氟气、氙为气体，溴为液态、硫为固体，故硫的熔沸点最高，故答案为：S；
（十）可以是二氧化硫与二氧化氮反应得到j氧化硫与N中等，反应方程式为S中₂+N中₂═S中₃+N中等，故答案为：S中₂+N中₂═S中₃+N中等；
（十）XeF₂和含Br中₃^-的溶液作用，反应除生成Br中₄^-外，还有一种酸手F和一种单质，由元素守恒可知没改单质为Xe，反应离子方程式为：XeF₂+Br中₃^-+手₂中=Br中₄^-+2手F+Xe↑，转移电子数为2，标出电子转移数目和方向为，
故答案为：．

---

下城区19311866181： 如图是元素周期表的一部分,表中所列字母分别代表一种元素.试回答下列问题:(1)以上元素中,属于d区元素的是______(填元素符号),h在周期表的位... - ？
亥咽派瑞：[答案] 由元素在周期表中位置,可知a为H、b为C、c为N、e为O、f为Na、g为Si、h为Cl、j为Ti、k为Fe.(1)d区元素包含ⅢB族~ⅦB族、第Ⅷ族元素,即3~10列元素(镧系元素、锕系元素除外),上述元素中Ti、Fe属于d区元素;根...

下城区19311866181： 如图是元素周期表的一部分,针对表中的①---⑥短周期元素,回答下列问题① ② ③ ④ ⑤ ⑥ (1)最活泼的金属元素是______(填元素符号)(2)④的原子结... - ？
亥咽派瑞：[答案] 根据元素在周期表中的分布,可以推知①是H,②是C,③是Na,④是Al,⑤是Si,⑥是Cl. (1)元素周期表中,从上到下,金属的活泼性逐渐增强,从右到左,金属的活泼性逐渐增强,所以最活泼的金属元素是Na,故答案为:Na; (2)金属铝是13号元素,原子...

下城区19311866181： 下表是元素周期表前五周期的一部分,X、Y、Z、R、W、J是6种元素的代号. X Y Z R - ？
亥咽派瑞： 根据元素在周期表中的位置知,X、Y、Z位于第二周期,R位于第三周期,W位于第四周期,J位于第五周期,Y和Z能形成化合物YZ2,该化合物中,Y显+2价,Z为-1价,Z位于第二周期,所以Z是F元素、X是N元素、Y是O元素、R是S元素、W是...

下城区19311866181： 如图是元素周期表的一部分.请回答下列问题. (1)查表可知,硫的相对原子质量为___;①号元素的核电荷数是___.(2)X3+与O2 - 的核外电子排布相同,则... - ？
亥咽派瑞：[答案] (1)从表中查出硫元素的相对原子质量为32.06;①号元素的核电荷数是5;故填:32.06;5. (2)O2-核外有10个电子,X3+与O2-的核外电子排布相同,则X是铝原子,其元素符号为Al;在元素周期表中位于第三周期,铝元素在化合物中显+3价,氧元素显-2...

下城区19311866181： 如图为元素周期表的一部分,已知A、B、C、D、E,5个原子共有85个电子,E原子核外有4个电子层,则B元素是 - ？
亥咽派瑞： E原子核外有四个电子层,处于第四周期,则A处于第二周期,C、B、D处于第四周期,A,B,C,D,E五种元素原子核外共有85个电子,则元素所处的周期处于过渡元素之后,令B的核外电子数为x,则C核外电子数为x-1,D核外电子数为x+1,A核外电子数为x-8,E核外电子数为x+18,则:x-1+x+x+1+x-8+x+18=85,解得x=15,故B为P元素,故选A.

下城区19311866181： 如图是元素周期表的一部分.请回答:(1)元素③与⑧的元素符号分别为 - -----、------.(2)元素①②⑥形 - ？
亥咽派瑞： 根据元素在周期表中的位置知,①②③④⑤⑥⑦⑧分别是H、Na、B、C、N、O、Si、Cr元素,(1)通过以上分析知元素③与⑧的元素符号分别为B、Cr,故答案为:B;Cr; (2)元素①②⑥形成的化合物是NaOH,NaOH中钠离子和氢氧根离子之...

下城区19311866181： 如图是元素周期表的一部分,已知A、B、C、D、E均为短周期元素,D元素最外层电子数为最内层电子数的3倍,下列说法中正确的是()ABCDE - ？
亥咽派瑞：[选项] A. 元素A位于第二周期ⅣA族 B. 原子半径:B>C C. 最高价氧化物对应水化物的酸性:C>E D. 气态氢化物的稳定性:D>B

下城区19311866181： 如图为元素周期表的一部分.下列说法错误的是()A.一个镁原子失去两个电子变成Mg2+B.铝原子核外有 - ？
亥咽派瑞： A、根据元素周期表中的一格中获取的信息,镁元素的原子序数为12,其核外有12个电子,第一层上有2个电子,第二层上有8个电子,最外层上有2个电子,在发生化学反应时容易失去2个电子变成Mg2+,故选项说法正确. B、根据元素周期表中的一格中获取的信息,铝元素的原子序数为13;根据原子序数=核电荷数=质子数=核外电子数,则铝原子核外有13个电子,故选项说法正确. C、地壳含量较多的元素(前四种)按含量从高到低的排序为:氧、硅、铝、铁,氧在地壳中含量最丰富,故选项说法错误. D、根据元素周期表中的一部分获取的信息,可知镁、铝、硅的原子序数依次增加,故选项说法正确. 故选:C.

下城区19311866181： 如图是元素周期表的一部分,表中所列字母分别代表一种化学元素:试回答下列问题:(1)按电子排布,可把周期表中的元素划分成5个区,其中j位于_____... - ？
亥咽派瑞：[答案] 由元素在周期表中的位置可知a为H,b为Li,c为C,d为N,e为O,f为F,g为Na,h为Mg,i为Al,j为Si,k为S,l为Cl,m为Ar,n为K,o为Fe, (1)j为Si元素,电子最后填充3p能级,处于p区,故答案为:P; (2)o为Fe元素,原子核外有26个电子,核外电子排布为1s22s22p63...

下城区19311866181： 如图是元素周期表的一部分,表中的①~⑧中元素,用元素符号或化学式填空回答:(1)在这些元素中,化学 - ？
亥咽派瑞： //g,反应离子方程式为:Al(OH)3+OH-=AlO2-+2H2O,故答案为、⑤为Al、⑥为Si.hiphotos.baidu.com/zhidao/wh%3D450%2C600/sign=f836106ecd1b9d168a929265c6ee98b9/bf096b63f6246b6082c330c5e8f81a4c500fa2b6://g.jpg＂ />,故答...