哪位英语达人能帮我中译英？小弟叩谢啦

哪位英语达人能帮我中译英？小弟叩谢啦~

intel在下不才 不知道
fab是极好的
Lab 是实验室的缩写]
workstation 是工作站
safety安全
equipment是是装备 配备
facility 是设施
TPT是什么的缩写我也不知道了!
Support stick起支撑用之类的东西 钢筋 木棍都有可能 反正一定是起支撑作用的
stress压力 严肃
totally 完全
bake oven烤箱
bake当然就是烘烤的意思了
facility完全的
cost花费 花销
```````````````````````````````````````````````````````````````
有什么写错的地方请其他网友指出! 至于PD TFT嘛! 可能是专业的缩写名词 在下就是真的不知道了
============分割线啊分割线==================
哎 ` 除了我都没人给你翻译吧...哎`

1.这是我第三次来上海，这几年上海发生了巨大的变化。
2.只要你打个电话，火车票很快就会送到你家。
3.一直争吵没用，我们必须采取行动。
4.我认为青年学生多学点科普知识是十分必要的。
5.今天晚上你可以呆在家里，或者参加我们的英语晚会。
6.只要你坚持操练英语口语，我肯定你会取得很大的进步。
7.作为学生，我们应充分利用宝贵的时间努力获取尽可能多的知识。

1.This is my third time to Shanghai, great changes have taken place in Shanghai over the past few years.
2.As long as you make a call, the train tickets will soon to your home.
3.Always quarrels useless, we must take action.
4.I think it is very necessary for young students to learn moreknowledge.
5.You can stay at home this evening, or to attend our English evening.
6.As long as you keep on practicing spoken English, I am sure you will make great progress.
7.As students, we should make full use of the precious time toacquire as much knowledge as possible.

The Intel has a lot of Fabs, seal to pack test factory and laboratory, there are many workstations in these places use to put to put equipment.The equipment weight which usually puts to put on the workstation is usuallyall ponderous, don't easily move of equipment.But these workstations all want to bear these equipments very long a period of time, at least several years, that is under the long-playing heavy pressure, these workstations usually have of will accept to can not stand weight to start change of a little bit tottering, so will produce a safe problem, once occurrence the workstation tilt to one side perhaps tumble down of words not only only equipment out of order, seriously will also cause personnel's dead and injured.If replace these workstation words, that new problem appeared again, all of these equipments were very heavy and already drive fix like, all facilities already pack like.Replace workstation words, want to give° the facility to tore down first, then still need to use large rise a heavy equipments to transport the equipment comes down from the workstation, again change new workstation, again move equipment up, had better give° the facility to install like, also need to carry on related adjust to try, the whole TPT is very endless, and the cost will increase a lot, this disallows under this year's the yield very tight circumstance, but this again relate to a safety problem, how do?
Lately solve a method:
According to the above problem and the antinomy, we launch a discussion and figured out a kind of lately problem-solving method ― ― that be adopt support stick.The concrete method is:Settle a support stick(the amount of support stick be decide by the different workstation shape) at workstation on all sides and each corner, so the ability is good to have the function of fixed workstation, make it Be getting firmer.Support stick's concretely creating a method is a cast iron of a burliness good bottom to use to glue sex very strongly glues paper to glue a ground perhaps prop up of workstation Cape, the coping opens a , offend silk, then the Ning,such as the screw and the Luo, emit, revolve screw to make the pedestal which lives workstation of the screw a dead dead crest noodles, then lock a dead nut, so a support stick completed.The Support stick can dismantle to pack at any time, if feel can easily tore down it, can also again and again use while doing not need this support stick, the support stick of this set workstation can apply to moreover one set workstation up, the height of support stick can regulate, it of another on carrying to need Ning to open a Luo mother, can regulate height, so need not worry two set workstations the size doesn't match each other, support stick need not support.
This project has already used on the lab bake workstation of the PD stress. If solve of our adoption normal regulations method is to change this table, re- put a lately firmer and reliable table, however does so, since the wave take a lot of time and make the cost raise again. Because, the bake oven is very heavy and the single set bake has a 500 kgs at least, the lab person can't move, need to pay to invite a person to move, and the cost which transports 2 set bakes will be a 2.2 ks.(include to dismantle facility of pack the bake)Then re- purchase a so big size and want the table cost of sufficient burliness will be 4 ks.So the totally cost learns to want at least 6.2.Cast aside cost don't say, change the table would also very great lab business of the degree influence, lab altogether only 3 set bakes, that time which changes table will have 2 set bakes and can't work, the PDAT in this year new product under unusually many circumstances absolutely disallow.But we adopted the above-mentioned method now, all problems were solve problems with the greatest ease.The cost of four support sticks is just 0.07 Ks and install of the time have never need stop bake work can install.This method cost is low, the usage is simple, universality wide, expand also very easy.

这个翻译成英语??

Intel has a lot of Fab, packaging and testing factories and laboratories, where many of the workstation used to display equipment. Often placed in the workstation on the weight of the equipment is very heavy and difficult to move the equipment. These are to bear these workstation equipment for a very long time, at least a few years, now that would in the long hours under heavy pressure, some of these workstation often can not afford to start changing the weight a bit shaky, this will result in security issues, The event of a workstation or tilt the collapse of the photoelectron it is not damaged equipment, will result in serious casualties. If the workstation to change them, then new problems have emerged, such equipment is very heavy and has been fixed properly, and all facility has been installed. The replacement of workstation, it should be the first facility to dismantle, and then to large-scale use of lifting equipment to move equipment from the workstation on down,再换new workstation, then equipment to move, preferably to the facility installed, but also to Relevant debugging, the TPT very long, and cost will increase many, this production is very tight this year in the circumstances is not allowed, but it also relates to safety issues, how do »
New solutions:
Based on the above problems and contradictions, we initiated discussions to find a new way to solve problems - that is, using support stick. Specific method is: the workstation around every corner of a resettlement support stick (support stick by the number of different workstation shape decisions), this way we can play a good role in fixed workstation, to make it more solid. Support stick specific production methods is a solid iron rods at the bottom with a strong adhesive Nianzhu viscous ground or workstation support Kok, a top open mouth, tapping and then twist such as screws and Lo run, the rotating screw that screws A section of stubbornly resisting the workstation table, and then lock nut, a support stick to complete. Support stick at any time entry, if it does not need this support stick when it can be very simple to dismantle it, can also be used repeatedly, the Taiwan workstation support stick can be applied to a workstation on the other, because the height of the support stick Can be regulated, it's just another twist one end of a nut, you can adjust the height, so do not worry two workstation size do not match, support stick together do not have the support.
The programme has been in the PD stress lab on the bake workstation use. If we use conventional solution is to replace the table and re-release of a new and more solid table, but to do so, not only a waste of time and cost will increase. Because, bake oven heavy, single bake at least 500 kg, lab people can not move, the need to move money Qingren Lai, 2-bake the removal of the cost will be 2.2 k (including the dismantling bake the facility). Then re-purchase such a large and strong enough to the table of the cost will be 4 k. Then totally to the cost of at least 6.2. Leaving aside cost is not that great extent for table will affect lab business, lab a total of only three bake, that the time table for a 2-bake will be unable to work, new products this year PDAT unusual number of cases is absolutely not Allowed. Now we have adopted the above method, all the problems have been solved. 4 support stick costs only 0.07 K, the installation of the need to stop work on the bake can be installed. This method of low-cost, easy to use, widely popular, is also very easy to promote.

Intel has a lot of Fab, packaging and testing factories and laboratories, where many of the workstation used to display equipment. Often placed in the workstation on the weight of the equipment is very heavy and difficult to move the equipment. These are to bear these workstation equipment for a very long time, at least a few years, now that would in the long hours under heavy pressure, some of these workstation often can not afford to start changing the weight a bit shaky, this will result in security issues, The event of a workstation or tilt the collapse of the photoelectron it is not damaged equipment, will result in serious casualties. If the workstation to change them, then new problems have emerged, such equipment is very heavy and has been fixed properly, and all facility has been installed. The replacement of workstation, it should be the first facility to dismantle, and then to large-scale use of lifting equipment to move equipment from the workstation on down,再换new workstation, then equipment to move, preferably to the facility installed, but also to Relevant debugging, the TPT very long, and cost will increase many, this production is very tight this year in the circumstances is not allowed, but it also relates to safety issues, how do »
New solutions:
Based on the above problems and contradictions, we initiated discussions to find a new way to solve problems - that is, using support stick. Specific method is: the workstation around every corner of a resettlement support stick (support stick by the number of different workstation shape decisions), this way we can play a good role in fixed workstation, to make it more solid. Support stick specific production methods is a solid iron rods at the bottom with a strong adhesive Nianzhu viscous ground or workstation support Kok, a top open mouth, tapping and then twist such as screws and Lo run, the rotating screw that screws A section of stubbornly resisting the workstation table, and then lock nut, a support stick to complete. Support stick at any time entry, if it does not need this support stick when it can be very simple to dismantle it, can also be used repeatedly, the Taiwan workstation support stick can be applied to a workstation on the other, because the height of the support stick Can be regulated, it's just another twist one end of a nut, you can adjust the height, so do not worry two workstation size do not match, support stick together do not have the support.
The programme has been in the PD stress lab on the bake workstation use. If we use conventional solution is to replace the table and re-release of a new and more solid table, but to do so, not only a waste of time and cost will increase. Because, bake oven heavy, single bake at least 500 kg, lab people can not move, the need to move money Qingren Lai, 2-bake the removal of the cost will be 2.2 k (including the dismantling bake the facility). Then re-purchase such a large and strong enough to the table of the cost will be 4 k. Then totally to the cost of at least 6.2. Leaving aside cost is not that great extent for table will affect lab business, lab a total of only three bake, that the time table for a 2-bake will be unable to work, new products this year PDAT unusual number of cases is absolutely not Allowed. Now we have adopted the above method, all the problems have been solved. 4 support stick costs only 0.07 K, the installation of the need to stop work on the bake can be installed. This method of low-cost, easy to use, widely popular, is also very easy to promote.

The Intel has a lot of Fab and pack the test factory and laboratory, there is many workstation in these places use to put to put equipment.The equipment weight which usually put to put on the workstation is usuallyall ponderous, not easy move of equipment.But these workstations all want acceptance these equipments very long a period of time, at least several year, that under the heavy pressure that long time, these workstations usually have of will accept to can not stand weight to start change of have a little tottering, so meeting creation safety problem, once occurrence workstation tilt to one side perhaps tumble down of words not only only equipment out of order, severity of also will cause personnel's dead and injured.If replace these workstation words, that new of problem again appear, all of these equipments be very heavy and already drive fix good, all facility already pack good.Replace workstation words, want to give° the facility to tore down first, then still need to use large the heavy equipments transport equipment from the workstation come down, again change new of workstation, again move equipment up, had better give° the facility install good, also need to carry on related adjust to try, the whole TPT be very endless, and cost will increment many, this this year yield very tight of under the circumstance disallow, but this again relation arrive safety problem, how do?
New of solve a method:
According to the above problem and the antinomy, we launch discussion and figured out a kind of new of problem-solving method ―― that be adoption support stick.The concrete method is:At workstation on all sides and each corner setting a support stick(the amount of support stick from dissimilarity of workstation shape decision), so ability good have fix workstation function, make it Be getting firmer.Support stick's ising concrete creation method be a fructify of iron casting stick the bottom use to glue sex to very strongly glue paper to glue ground perhaps prop up of workstation Cape, the coping open a , offend silk, then the Ning,such as screw and Luo, emit and revolve screw to make screw a dead dead crest the pedestal which live workstation noodles, then lock dead nut, so a support stick completion.The Support stick can dismantle to pack at any time, if feel not a demand this support stick can easily tore down it, can also again and again use, the support stick of this set workstation can apply to another one set workstation up, support stick of height can regulate, it of another a carry to need Ning to open Luo mother, can regulate height, so need not worry two set workstations the size don't match each other, support stick need not support.
This project already usage on the lab bake workstation of the PD stress. If our adoption normal regulations solve a method be change this table, re- put a new firmer and reliable table, however so do of words, since the wave take a lot of time, again make cost exaltation. Because, the bake oven be very heavy, the list set bake have a 500 kg at least, the lab person can't move, the demand pay to invite a person to move, this porterage 2 set bake of the cost will be a 2.2 k.(include to dismantle facility of pack the bake)Then re- purchase a so big size and want enough fructify of table cost will is 4 k.So the totally cost learn to want at least 6.2.Cast aside cost don't say, change the table would also very great degree influence lab business, lab altogether only 3 set bakes, that time which change table will have 2 set bakes can't work, the PDAT that is this year new product abnormality many of under the circumstance is absolute disallow.But now our adoption above-mentioned method, all problem drive solve problems with the greatest ease.The cost of four support stick is just 0.07 K and install of the time have never need stop bake work can install.This method cost is low, the usage be simple, universality wide, expansion also very easy.

老兄啊 这些200分也不够啊

intel在下不才
不知道
fab是极好的
Lab
是实验室的缩写]
workstation
是工作站
safety安全
equipment是是装备
配备
facility
是设施
TPT是什么的缩写我也不知道了!
Support
stick起支撑用之类的东西
钢筋
木棍都有可能
反正一定是起支撑作用的
stress压力
严肃
totally
完全
bake
oven烤箱
bake当然就是烘烤的意思了
facility完全的
cost花费
花销
```````````````````````````````````````````````````````````````
有什么写错的地方请其他网友指出!
至于PD
TFT嘛!
可能是专业的缩写名词
在下就是真的不知道了
============分割线啊分割线==================
哎
`
除了我都没人给你翻译吧...哎`

---

陕西省19763283536： 哪位英语好的大哥大姐帮我翻译一下这句话,小弟跪谢,“我会一直等下去,不管以后会怎样,因为只有你才能做我的新娘,我也坚信会等到你.”？
琦富东药： I will wait forever ,no matter what happened later.Because only you can be my bride and I aslo believe I can get you

陕西省19763283536： 哪位英语高手大侠能帮忙翻译一个句子吗?小弟感激不尽啊 - ？
琦富东药： I know you tend to spend freely. You will need to pay me six hundred thousand to seven hundred thousand; in addition, you will also need to cover the expenses of damaged tools and materials of around twenty thousand RMB. I hope you will start resolving this matter at your earliest convenience.

陕西省19763283536： 英语高手!!!!帮我翻译一篇关于印刷的文章 - ？
琦富东药： Design as a result of graduating from an English translation of approximately 100 million characters in Chinese characters translated articles about 5000 words, which you can find articles to help translate Thank you, boy!

陕西省19763283536： 哪位英语高手能帮忙翻译一个句子吗,小弟感激不尽啊 - ？
琦富东药： The penalty and the payment for new added items which you have signed for approval haven't been paid. By the way, the number turned up that day was great, and some of our instrument had been damaged. I hoped you can deal this properly. In a word,the questions are to be solved; The contract can not be released.

陕西省19763283536： 哪位英语高手大侠能帮忙翻译一个句子吗?小弟感激不尽啊我知道你是愿意花大钱的人,你需要赔付我60 - 70万人民币,还有那天你们损坏的工具与物料的... - ？
琦富东药：[答案] I know you tend to spend freely.You will need to pay me six hundred thousand to seven hundred thousand; in addition,you will also need to cover the expenses of damaged tools and materials of around tw...

陕西省19763283536： 哪位英语高手,帮我翻译下.谢谢？
琦富东药： LOVE YOU NO REASON NO EXCUSE I HOPE TO BE WITH YOU ALL MY LIFE , TOGETHER WATCH TV AND WALK ON THE SEASIDE EVERYDAY. PLEASE PROMISE ME TO COMPARE WITH ME ALL MY LIFE! 哈~~玩一下~~翻译得不好别怪偶~~

陕西省19763283536： 哪位大侠帮用英语翻译下面一段话,小弟拜谢？
琦富东药： I am cheerful, modest, humble, self-discipline, self-confidence. Good team, there is some organization and coordination. And have excellent communication skills, work conscientiously, strong sense of responsibility.Receptivity to new things quickly, ...

陕西省19763283536： 哪位高手翻译一下,小弟谢谢了？
琦富东药： I pray you will as soon as possible make your name known in the world! 这么翻译就很不错了!我的笔记本上有类似表达 你学习英语可以看这个网页 http://www.english8848.net/e3008 练习听力可以来 http://www.english8848.net/fun 有问题来知道问

陕西省19763283536： 《一个文盲的悲哀》,哪位高人可以翻译?小弟不胜感激!拜托了! - ？
琦富东药： the Sorriness of A Illiteracy 因是书名,用的时候用斜体就好,无需再加书名号 Illiteracy就是illiteracy的首字母大写